Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 198

Stand-alone installation testing
............................................................................................................................................................................................................................................................
Quantity
1
1
1
1
PC minimum requirements
For PC minimum requirements refer to
............................................................................................................................................................................................................................................................
6 - 4
Description
Personal Computer (PC)
CIT Interface Cable
CIT Cross-Over Cable
Software CD-ROM
Software Release Description
(SRD)
LBOs
Comments
Required to run the WaveStar
software.
8-ft. long RJ45 to 9-pin D-sub serial cable
(Comcode 848748869). Required to
connect the PC to the CIT jack on the
front of the SYSCTL circuit pack.
This cable is used for IAO LAN
(OSI/TCP-IP) Front LAN connection
cross over cable should be used if the shelf
is directly connected to a PC and LAN
10BASE-T straight through cable should
be used if shelf is connected to a hub
Verify latest software version is being
used.
Verify latest the issue of the SRD is being
used, for the software that is used.
15-dB, 10-dB and 5-dB LBOs are required
when looping back the main OLIUs on
themselves.
"PC minimum requirements".
®
CIT
365-372-603R2.0
Issue 1 January 2009