Cable And Fiber Installation - Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual

3 Cable and fiber
installation
Overview
Purpose
This section provides cabling instructions for the Alcatel-Lucent 1850 Transport Service
Switch 60 (TSS-60) shelf using the horizontal bay mount configuration. The
Alcatel-Lucent 1850 TSS-60 shelves with the removable center divider can support either
half width or full width cards in the Main function slots.
Note:
packs. The "ANGLED" is referring to the rotating boot on the connector and not the
connector. APC or Angled Polished Connectors are not supported.
Contents
This chapter provides information on the following topics:
Planning
Connector references
Inspection
DS1/EI cable installation
DS3/EC-1 cable installation
DS1 and DS3 hybrid cable installation
10/100BASE-T Ethernet cable installation
IAO LAN and TCP/IP cable installation
Modem cable installation
Sync cable installation
Office alarm cable installation
............................................................................................................................................................................................................................................................
365-372-603R2.0
Issue 1 January 2009
Ensure only ANGLED LC connectors appear at IN ports of optical circuit
3-3
3-6
3-7
3-8
3-16
3-35
3-42
3-46
3-50
3-52
3-57
3 - 1