............................................................................................................................................................................................................................................................

Remove the second LNW49 from the packing material.

Place the circuit pack into the shelf (slot D2 or G2 as required).

Repeat

equipped with LNW49 circuit packs.

Check off the appropriate box in

N D

........................................................................................................................................................

LNW62 (4 OC-48 PTM OLIU) or LNW55 (OC-3/OC-12/OC-48 12/4 port OLIU) low-speed installation

(optional)

Follow this procedure only if installing the LNW62 (4 OC-48 PTM OLIU) or LNW55

(OC-3/OC-12/OC-48 12/4 PTM OLIU) circuit packs into the Alcatel-Lucent 1850

TSS-60 shelf.

Note:

VLF main OLIU to be used.

Note:

containing the circuit pack, the other containing the ordered quantity of PTMs. This

procedure will consist of two parts.

– Install the circuit card.

– Install the PTM.

Refer to the engineering job specification. Identify the proper function group(s) and/or

growth slot(s) where LNW62 or LNW55 circuit pack will be installed.

Remove the LNW62 or LNW55 from the packing material.

Place the circuit pack into the shelf (slot D1 or G1 as required). Do NOT engage the

circuit pack in the backplane connector.

4 - 2 0

Step 1

through

Step 6

T E P S

The LNW62 and the LNW55 circuit packs require the LNW141 or LNW84

The LNW62 and LNW55 circuit packs comes in two separate boxes. One box

for each additional function group and/or growth slot to be

"Installation checklist" (p.

Initial circuit pack installation

I-6).

365-372-603R2.0

Issue 1 January 2009

Table of Contents

Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 162

Related Manuals for Alcatel-Lucent 1850 TSS-60

Related Products for Alcatel-Lucent 1850 TSS-60

Table of Contents