Table of Contents
Advertisement
Stand-alone node setup
............................................................................................................................................................................................................................................................
Circuit pack program version verification
Description
This section provides instructions verifying that program versions on the circuit packs in
the Alcatel-Lucent 1850 TSS-60 shelf. The procedures in this section assume that the
SYSCTL is installed and the circuit packs have been installed in the shelf as described in
the preceding sections.
Circuit pack program version verification procedure
Proceed as follows:
........................................................................................................................................................................................................................
1
Log on to the Alcatel-Lucent 1850 TSS-60 shelf using the CIT software as described in
the
"Use of WaveStar
........................................................................................................................................................................................................................
2
Use the
........................................................................................................................................................................................................................
3
Click on the
Result:
........................................................................................................................................................................................................................
4
Click on an installed circuit pack.
........................................................................................................................................................................................................................
5
Select
Click
Result:
program associated with it, the version number will be displayed next to Program
Version:. Compare it to the table of Program Versions in Chapter 6 of the Software
Release Description (SRD).
........................................................................................................................................................................................................................
6
On any circuit pack where the Program Version: did not match the version number for it
in the Program Version table in the SRD, re-seat that circuit pack and wait 15 minutes.
........................................................................................................................................................................................................................
7
Click on the GUI
Result:
............................................................................................................................................................................................................................................................
5 - 1 2
®
CIT software" (p.
GUI
window and select the
View:Equipment
All packs inserted into the shelf will be displayed.
to issue the command.
The circuit pack information will be displayed. If the circuit pack has a
View:Equipment
All packs inserted into the shelf will be displayed.
5-8).
view-eqpt
command.
command.
command.
Circuit pack program version verification
Issue 1 January 2009
365-372-603R2.0
Advertisement
Table of Contents
