............................................................................................................................................................................................................................................................

Place the circuit pack into the shelf (slot A1/B1). Do NOT engage the circuit pack in the

backplane connector.

If a protection circuit pack is required, continue with Step 5 If not, install an LNW43 or

LNW96 Apparatus Blank into the protection circuit pack slot (A2/B2), then proceed to

Step

Important!

and A2/B2 to provide proper air flow for cooling.

Remove the second LNW39, LNW391, LNW111 or LNW112 from the packing material.

Place the circuit pack into the shelf (slot A2/B2). Do NOT engage the circuit pack in the

backplane connector.

Check off the appropriate box in

N D

........................................................................................................................................................

LNW7 (28DS1PM) and LNW8/LNW801 (56DS1E1) installation (optional)

Follow this procedure only if installing LNW7 (28DS1PM) or LNW8/LNW801

(56DS1E1) circuit packs into the Alcatel-Lucent 1850 TSS-60 shelf.

Note:

is used.

Refer to the engineering job specification. Identify the proper function group slots that

LNW7, LNW8 or LNW801 circuit pack will be installed into.

Remove the LNW7, LNW8 or LNW801 from the packing material.

Place the circuit pack into the shelf (slot D1 or G1 as required). Do NOT engage the

circuit pack in the backplane connector.

365-372-603R2.0

Issue 1 January 2009

LNW43 or LNW96 Apparatus Blanks are required in all unused slots A1/B1

T E P S

The LNW7 is not supported when the LNW141 or LNW84 VLF main OLIU

"Installation checklist" (p.

Initial circuit pack installation

I-6).

4 - 1 3

Table of Contents

Alcatel-Lucent 1850 TSS-60 Installation And System Turn-Up Manual page 155

Related Manuals for Alcatel-Lucent 1850 TSS-60

Related Products for Alcatel-Lucent 1850 TSS-60

Table of Contents