Table of Contents
Advertisement
Stand-alone installation testing
............................................................................................................................................................................................................................................................
Verify that the port is provisioned for DS3.
•
Check the DS3/EC1 cabling for proper connections.
•
........................................................................................................................................................................................................................
13
Use the GUI command to delete the cross-connect.
........................................................................................................................................................................................................................
14
Click Configuration:Cross-Connections.
........................................................................................................................................................................................................................
15
Select Delete legs of an Existing cross-connection.
........................................................................................................................................................................................................................
16
Select Next.
........................................................................................................................................................................................................................
17
Click on the
........................................................................................................................................................................................................................
18
Double click on port 1 (OC-N).
........................................................................................................................................................................................................................
19
Select Next.
........................................................................................................................................................................................................................
20
Select Next.
........................................................................................................................................................................................................................
21
Select Finish.
........................................................................................................................................................................................................................
22
Click Yes.
........................................................................................................................................................................................................................
23
Click Yes.
Result:
of the PRBS signal.
........................................................................................................................................................................................................................
24
Remove the test set connections from the DSX-3.
............................................................................................................................................................................................................................................................
6 - 2 0
main (OC-N).
The DS3 test set should indicate a blue (AIS) signal is being received in place
DS3/EC1 testing
365-372-603R2.0
Issue 1 January 2009
Advertisement
Table of Contents
