Table of Contents
Advertisement
Stand-alone installation testing
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
6
Under Ethernet (LAN) Ports, click
........................................................................................................................................................................................................................
7
Apply
Click
........................................................................................................................................................................................................................
8
Connect a RJ45 Ethernet cable from the LAN port on the LNW2 SYSCTL to the first
position on the RJ45 Ethernet patch panel.
........................................................................................................................................................................................................................
9
Connect a second RJ45 Ethernet cable from the PC Ethernet port to the second position on
the RJ45 Ethernet patch panel.
........................................................................................................................................................................................................................
10
Watch for the link LED to light on the PC's Ethernet card or wait for 30 seconds.
........................................................................................................................................................................................................................
11
Login to the shelf using the OSI connection.
Result:
........................................................................................................................................................................................................................
12
Log out of the Alcatel-Lucent 1850 TSS-60 shelf.
........................................................................................................................................................................................................................
13
At the RJ45 Ethernet patch panel disconnect the RJ45 Ethernet cable run to the PC
Ethernet port and connect it to the next position on the RJ45 Ethernet patch panel to be
tested.
........................................................................................................................................................................................................................
14
Ignore the flashing fault LED on the Ethernet circuit pack and any alarms on the shelf.
........................................................................................................................................................................................................................
15
Watch for the link LED to light on the PC's Ethernet card or wait for 30 seconds.
........................................................................................................................................................................................................................
16
Login to the shelf using the OSI connection.
Result:
............................................................................................................................................................................................................................................................
6 - 2 6
.
Successful login to the Alcatel-Lucent 1850 TSS-60.
Successful login to the Alcatel-Lucent 1850 TSS-60.
Select All
.
LNW74 and LNW66 testing
365-372-603R2.0
Issue 1 January 2009
Advertisement
Table of Contents
