Table of Contents
Advertisement
10. Carefully lift the AC input cover into place, ensuring that the cover does not pinch any of the
wires.
11. Re-attach the cover using the six screws.
12. Using the eight screws, re-attach the two knockout plates and ensure the appropriate strain
relief is in place for each line cord.
13. Using the six captive screws, reinstall the rear cover of the projector.
Connecting to an uninterruptible power supply
An uninterruptible power supply (UPS) allows the projector head electronics to remain operable during
a power failure.
Warning! If not avoided, the following could result in death or serious injury.
•
SHOCK HAZARD! The optional UPS power cord must be inserted into an outlet with grounding.
The following table lists the part numbers for the optional UPS power cords for each region.
Description
North America 250V/20A
Japan 250V/20A
China 250V/16A
CineLife+ RGB PLF Installation and Setup Guide–CP4440-RGB, CP4450-RGB
020-103072-04 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Part Number
108-386108-XX
108-370101-XX
108-372103-XX
Installing and setting up
29
Advertisement
Table of Contents
