Replacing The Power Supply - Christie GS Series Service Manual

1. Remove the top cover.
See Removing the top cover
2. Remove the main board and I/O board.
See Replacing the main board and I/O board
3. Remove the rear cover.
See Removing the rear cover
4. Remove the fan 4.
See Replacing fans 4 and 5
5. Unplug the connector for the thermal switch cable.
6. To remove the thermal switch, remove one M3 screws with a Phillips #1 screwdriver.
7. Replace the thermal switch.
8. To re-install, follow these steps in reverse order.

Replacing the power supply

To remove the power supply, complete the following steps.
1. Remove the top cover.
See Removing the top cover
2. Remove the main board and I/O board.
See Replacing the main board and I/O board
3. Remove the rear cover.
See Removing the rear cover
4. Remove the left-side cover.
GS Series 630-635 Service Manual
020-001224-02 Rev. 1 (08-2018)
on page 51.
on page 69.
on page 52.
on page 58.
on page 51.
on page 69.
on page 52.
Electronics
61