Erasing Dark Borders And Frame Lines (Erase Frame) - Canon imageRUNNER 2206 User Manual

Erasing Dark Borders and Frame Lines (Erase Frame)

NOTE
● The width of the frame to erase is increased or decreased relative to the <Copy Ratio> setting.
● <Erase Frame> is not available when using <2 on 1>/<4 on 1> or <ID Card Copy>.
<Copy>
erase
Original Frame
Specify <Outer Frame Width> to erase the dark borders and frame lines that appear around the copy if the
original is smaller than the selected paper size. You can also use this mode to create a blank border around
the edge of the copy.
Book Frame
Specify <Center Frame Width> and <Outer Frame Width> to erase the dark borders, as well as center and
contour lines that appear if you are copying facing pages in a bound original onto a single sheet of paper.
LINKS
When copying documents that are smaller than the output paper size, frame
lines may appear around the edges in the copied image. When copying facing
pages from thick book, dark borders may appear. <Erase Frame> enables you
to erase these frame lines and dark borders.
<Erase Frame> Select the type of Erase Frame
<Apply> Select the paper size on the <Scan Size> screen
Copying
56
Specify the width of the frame to
3EEJ-015