View The Firmware Version; Reset To Factory Settings - NovaStar MX Series User Manual

Do any of the following as required.

View the diagnostic results
Select View Results to enter the report page and view the results.

Export the diagnostic result to a USB drive
a.
Insert the USB drive to the USB port on the front panel of the device.
b.
Select Export to USB Drive.
A prompt will be displayed after the operation is successful.

7.7 View the Firmware Version

View the current firmware program version of the device.
On the main menu screen, select System Settings.
View the current firmware program version next to Firmware Version.
Figure 7-9 Firmware version

7.8 Reset to Factory Settings

Reset part or all of the device data to the factory settings.
On the main menu screen, choose System Settings > Factory Reset.
Figure 7-10 Factory reset
Do any of the following according to the data you want to reset.

Reset part of the data
Reset all the data except the imported files, network parameters, language settings, and device name.
a.
Select Keep User Data.
b.
Select Yes in the displayed dialog box.
The device restarts automatically while the data is being reset.

Reset all the data (This action cannot be undone.)
Reset all the data to factory settings.
a.
Select Reset All.
b.
Select Yes in the displayed dialog box.
www.novastar.tech
MX30 LED Display Controller User Manual
24