Return To Home (S); Diagnostics; About; Factory Reset - NovaStar VX1000 User Manual

5.9.2 Return to Home (s)

You can set the period when the system stays at the current screen before returning to the homepage
automatically when there is no operation performed. The value ranges from 60s to 3600s.
On the main menu screen, go to System Settings > Return to Home (s) and press the knob to confirm.
Rotate the knob to select the desired time value and press the knob to confirm.

5.9.3 Diagnostics

The diagnostics function helps you to diagnose the system and troubleshoot the malfunctioned device
components.

When the device fails, you can run the diagnostics function to test the device. You can send your test to
our technical support staff for problem locating and processing.

For daily maintenance, you can run the diagnostics function to do the routine health check for the system.
On the main menu screen, go to System Settings > Diagnostics and press the knob to open the
confirmation window. Rotate the knob to select Yes and press the knob to confirm.
Note:
Running diagnostics will transiently disrupt the output, and the output will resume after the diagnostics are
completed.

5.9.4 About

Under this menu item, you can view the firmware version, official website and email address. On our official
website, you can check the latest device information and the updates for this device. You can also send your
feedback or suggestion to us for improvements via the supplied email address.
On the main menu screen, go to System Settings > About and press the knob to show all the information.
Figure 5-45 About

Factory Reset

Factory reset function allows you to reset all the parameter settings of the device to factory defaults after the
device update or when you think the parameters are improperly set.
On the main menu screen, rotate the knob to select Factory Reset and press the knob to enter the factory
reset screen.
www.novastar.tech
VX1000 All-in-One Controller User Manual
38