Ina And 100 Dcd Module Problems - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual

Maintenance and Troubleshooting
After selecting Clock , the following screen appears. Contact the TSO if you need assistance
interpreting this information.
Clock Slot xx:
mm/dd/yy
Admin as:
Active:
Synch source:
PPM: xxx
Back
100R INA and 100 DCD Module Problems
In addition to other module tests, both the 100R INA and 100 DCD modules require the following
tests:
''Line Loopback Test''
I
''Payload Loopback test''
I
''Bit Error Rate Test (BERT)''
I
In addition, the 100 DCD module requires the following tests:
''Data-Channel Loopback Test''
I
''Data-Terminal Loopback Test''
I
''Data-Port Local Loop Test''
I
In addition to checking the error logs, the 100R INA and 100 DCD modules require that you check
the error events specific to these modules. See
details.
100R INA and 100 DCD Module Error Events
Four additional error events apply to the 100R INA and 100 DCD modules:
''24-Hour Total''
I
''Current Event''
I
''Interval Event''
I
''Clear Error Events''
I
From your system programming console, use the following sequence to access the 100R INA or
100 DCD module Error events screen (be sure to select the corresponding 100R INA or 100 DCD
module slot number).
Procedure
→
Menu
Maintenance
Module Problems
4-24
hh:00-hh:mm
on page 6-30
on page 6-31
on page 6-31
on page
on page
on page 6-33
on page 4-25
on page 4-26
on page 4-26
on page 4-26
→ →
Slot Slot#
4
6-32
6-33
''100R INA and 100 DCD Module Error Events''
4
→ →
Enter Error Event
for
4