Password - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual

3. Type the IS II/III password, and press R.

Password:

4. Type ams for the terminal emulation type, and press R.
Unix disk usage
information
Term=
If you are working with IS II, the IS II Main menu appears.
I
If you are working with IS III, the system prompts you for your login registration. After you
I
enter your login and press R, the IS III Main menu appears.
5. To exit from IS II/III programming, click 5 ( Back ).
The system prompts you for confirmation that you want to exit. After confirmation, the following
message appears:
Returning to SPM
Password
The Password option is used by qualified service personnel to change the modem connection
password. A password is always required to establish a connection with the built-in modem. The
password always consists of seven characters. You can perform remote system programming only
if you enter the password correctly. A default password is set at the factory. You must obtain this
password from your system consultant (SC).
To change the modem connection password, follow the steps below:
3
Basic System Management Procedures
About WinSPM
3-41