System Programming Basics
Quick Access. Enables you to access many common features including: Allowed/Disallowed
I
Lists, Automatic Route Selection, Call Pickup Groups, Calling Groups, Capture Data,
Coverage Groups, Labeling, Personal Lines, Set Date & Time, Speed Dial, System Inventory,
Telephone Programming, Telephone Restrictions.
Using View
WinSPM provides the View interface which allows you to browse and view, save and/or print
reports and notes saved in WinSPM. The Tools option is available from the left-hand panel on the
WinSPM Main Screen. For instructions on performing these tasks, refer to
Using Tools
WinSPM provides the Tools interface which allows you to complete common system tasks in an
extremely user-friendly manner. The Tools option is available from the left-hand panel on the
WinSPM Main Screen. For instructions on performing these tasks, refer to
Management Procedures'' on page
The following tasks can be performed from the Tools option:
Backup. The Backup option is used by qualified service personnel to create a file of system
I
programming information either in a specified directory (on the hard drive of the PC) or on a
floppy disk. For detailed instructions, refer to
Restore. The Restore option is by qualified service personnel to load system programming
I
from either a disk or from the hard disk into the processor module memory. For detailed
instructions, refer to
Browse. The Browse option is used to browse through reports and notes saved in WinSPM.
I
For detailed instructions, refer to
Using View
3-18
3-31.
''Restore'' on page
3-44.
''Browse'' on page
3
3
''Backup'' on page 3-31.
3-36.
''Browse'' on page
3-36.
''Basic System