Wan3 10/100 - Avaya IP Office Installation Manual

10.7.7 WAN3 10/100

The IP400 WAN3 10/100 module can be used to add an additional 3 WAN ports to an IP Office system. These ports are
used for V.24, V.35 and X.21 WAN services.
Unlike other external expansion modules the WAN3 10/100 module connects to the IP Office control unit via LAN ports. It
has its own IP address, which is obtained by DHCP.
The WAN3 exists in two variants. The original WAN3 only supported a 10Mbps LAN connection and is not supported on IP
Office 3.2 and higher. The WAN3 has been superseded by the WAN3 10/100 which supports a 10Mbps/100Mbps LAN
connection.
Feature Details
Supported on All IP400 control units except Small Office Edition and IP500.
Locales Supported in all IP Office locales.
Software Level WAN3 10/100: IP Office core software level 1.4 minimum. Bin file = ipwan3.bin.
Included Power supply unit (see below) and LAN Interconnect cable.
Power Supply The unit is supplied with an earthed 3-Pin, 60W external power supply unit. The PSU has an
integral power cord for connection to the unit's DC I/P socket. A locale specific
power cord
• Older units were supplied with a 2-Pin, 40W external power supply unit which used a locale
Mounting The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack
Mounting Kit.
Dimensions Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Weight Unboxed: 2.8Kg/6.3lbs. Boxed: 4.1Kg/9.2lbs.
IP Office Installation
IP Office
for the external PSU is required but is not supplied with the unit.
specific locale specific IEC60320 C7 power
System Components: IP400 Expansion Modules
cord.
15-601042 Issue 20b (16 July 2009)
IEC60320 C13
Page 257