Options In The Spm Main Menu - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual

System Programming Basics
Table 3-1. Function of PC Keys in WinSPM–Continued
PC Key MLX-20L
Del Delete
t b
n/a
l r

Options in the SPM Main Menu

Table 3-2 lists the options in the SPM Main Menu and gives a brief description of each option.
Detailed procedures for each option are on the following pages.
Table 3-2. SPM Main Menu Options
Option
Sys Program
1
Backup
1
Boards
1
Print Opts
Monitor
Maintenance
1
Restore
Pass-Thru
Password
Language
1 WinSPM option only. Not available on the system programming console. To be used only by qualified service
personnel.
Using Standard SPM Mode
3-30
4424LD+
Delete
n/a
Function
To program the system.
To make a backup copy of your system programming and store it on a floppy
disk or on hard disk.
To show which modules (port boards) are in each slot of the control unit and
allows you to assign boards to slots.
To direct reports to printer or to the PC for storage on a floppy disk or on hard
disk.
Restricted to use by your technical support organization.
Restricted to use by your technical support organization and qualified
technicians.
To restore your system programming from floppy disk or from hard disk.
(IS II/III and 100R INA only) To make a remote connection, through the
control unit, to a 100R INA module or IS II/III PC to program applications on
the IS II/III PC.
To change the password for remote entry into the system
To select a language (U.S. English, Canadian French, or Latin American
Spanish) for the console simulation window on the PC. (There is also a
Language option available on the System Programming menu that allows you
to set the System Language.)
WinSPM Function
The D key on your PC can be used instead of 8
(Delete) when Delete appears as a choice in the
console simulation window.
The up, down, left, and right arrow keys can be used
to highlight selections in a menu and to select the 20
line buttons below the console simulation window.
3