Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual page 168

Table 6-5. NI-1 BRI Provisioning Test Result Codes–Continued
Result
Code Description
No voice or data
MLHDV
hunting, or
Incorrect voice and
data MLHG DN if
MLHG DN is
present, or
Voice and data
hunting was
observed with no
MLHG DN
BRI facility that is
OKH
part of an MLHG is
provisioned with
functioning voice
and data
capabilities
BRI facility that is
OKNOH
not part of an
MLHG is
provisioned with
functioning voice
and data
capabilities
No or incorrect
SPID
SPID
administration
MERLIN MAGIX
LG
BRI error on that
facility
Corrective Action
The facility is correctly programmed and established with
Layers 1, 2, and 3 with functioning voice and data
capabilities.
Combination of the causes of MLHV and
No action is required if the MLH voice and data
functionalities are expected. If MLH is not expected, verify
that the MLHG DN is present and, if so, remove it and rerun
the test.
No action is required if non-MLH voice and data functions
are expected. If MLH is expected, verify that the MLHG DN
is not present and, if so, administer it and rerun the test.
Check that the facility is programmed with the SPID
provided by the LEC and rerun the test. If the error persists,
contact the LEC.
This result should never appear; if it does, contact the TSO.
Tests
.
MLHD
NI-1 BRI Provisioning Test
6-19