Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual page 212

Table B-3. Message That Can Appear During a Restore–Continued
Restore Message
Inserted Memory Card is
not the correct type.
Remove and insert
MERLIN MAGIX Backup/
Restore Card.
Restore Failure.
RESTORE IS
CANCELED. Board
mismatch between
control unit and
file.
Restore Failure.
RESTORE IS
CANCELED. Restore
file Mode is
Hybrid/PBX.
Control Unit strap
in place for KEY .
What It Means
The inserted card does not match the
card option selected from the System
menu.
A mismatch exists between the
hardware components present on the
current system and the hardware
components reflected in the backup
file. The restore is aborted.
If the processor module has been
strapped for Permanent Key mode, a
restore to Hybrid/PBX mode is not
possible.
Backing Up with a Memory Card
What To Do
Remove the card and
repeat the restore
procedure with the correct
type of card. See
Types" on page B-1
information about the card
labels.
Do one of the following:
Repeat the restore
procedure with another
file.
Modify the system
hardware to match the
configuration of the
backup file and repeat the
restore procedure with the
same file.
Modify the processor.
CAUTION:
This procedure
should be
performed only
by qualified
service
personnel.
"Card
for
Restore
B-9