1.7 External Expansion Module
An external expansion module can be used to add extra ports to the system. Only one external expansion unit is
supported.
· The external expansion module is supplied with a blue 1 meter (3'3'') expansion interconnect cable. This cable
must be used when connecting to expansion ports on the rear of a control unit.
Each module uses an external power supply unit supplied with the module. A locale specific power cord for the PSU must
be ordered separately. Both types of module use an IEC60320 C13 type earthed power cord.
IP500 Digital Station 16 Module
·
Provides an additional 16
IP500 Phone 16 Module
·
Provides an additional 16 PHONE ports for analog phones.
PARTNER Version Installation Manual
IP Office Essential Edition
DS
ports for 1400 Series phones.
Page 16
- Issue 1c (09 April 2010)