Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual page 358

System Programming Basics
Connection Preferences
Data Bits: 8
Parity: None
Stop Bits: 1
[X] Wait for dial tone before dialing
Advanced
[X] Use Flow Control
[X] Hardware (RTS/CTS)
7. To save the new settings, click OK.
8. To close the Modem Properties dialog box, click Close.
9. From the Control Panel, click File, then choose Exit to close the Control Panel and return to the
Windows desktop.
Adding a New Modem Definition
If the system you are using is not dedicated for connection with WinSPM to the MERLIN MAGIX
Integrated System for programming and the modem on that system can be used for other
purposes, do the following:
1. From the Windows desktop, click Start.
2. Go to Settings and choose Control Panel.
3. Double-click the Modem icon. A list of modems configured in the system is displayed.
4. Take note of the name of the modem that is currently being used in the system to make
connection to the MERLIN MAGIX Integrated System.
5. Press the Add button. The Install New Modem Wizard appears.
6. Select the "Don't detect my modem" check box and click Next.
7. Highlight the name of the modem manufacturer for your modem.
8. Highlight the name of your modem in the Models list and click Next.
9. Select the COM port that corresponds to the COM port used by your modem and click Next.
10. Once your modem is set up successfully, click Finish to complete the operation. The new
modem now appears in the list of modems on the Modem Properties form (usually with the
same name as the modem identified in Step 4) with a #2 after it.
11. Highlight the name of the new modem and click Properties.
12. On the General tab, change the value in the drop-down list under Maximum Speed to 2400.
Setting Up your Desktop
3-6
3