Setting Arrhythmia Alarms - GE CARESCAPE ONE User Manual

CARESCAPE ONE User Manual DRAFT 26 October 2017
Alarms
ECG
Noisy ECG
Arrhythmia paused
According to what has been allowed in the Care Unit Settings, the selectable priorities
may include the following:
Escalating, High, Medium, Low, Informational
●
The possible selections in the Care Unit Settings vary per parameter, so not all
priorities are available for all of the alarms. The general warning sign displays when
the selected alarm priority setting for the following deviates from the recommendation
of international alarm safety standards:
Tachy/Brady PR high/low
●
- V Tach
●
- IP high/low
●
NIBP high/low
●
- SpO2 low
●
- Et/Fi CO2 high/low
●

Setting arrhythmia alarms

You can set the arrhythmia alarms in the Alarms Setup menu, or in the ECG menu.
1. Select Alarms Setup from the main menu.
2. Select the Arrhythmia tab.
3. Select Lethal Alarms.
You can now select the Alarm Priority and Create Snapshot options per
arrhythmia. For V Tach, you can also select the V Tach Criteria:.
4. If Full Arrhythmia license is enabled, you can also select options for the Ventricular
Alarms and Atrial Alarms.
Ventricular Alarms: You can select the Alarm Priority and Create Snapshot
●
options.
Atrial Alarms: You can select the Alarm Priority and Create Snapshot options.
●
In addition, you can set the detection criteria for SV Tachy: SVT Length, HR for
SVT/min, and Pause Interval.
82
Invasive pressures
PA high/low
RAP high/low
RVP high/low
LAP high/low
ICP high/low
CPP high/low
P1 high/low and P2 high/low
CARESCAPE ONE
Other parameters
Resp (Imped.) measurement
paused
RR (CO2) high/low
Apnea (CO2)
CO2 high/low
Temp high/low
2094480-001