Invasive Pressures Color Settings For Channels; Other Parameters Color Settings; Monitor Sound Settings - GE CARESCAPE ONE User Manual

CARESCAPE ONE User Manual DRAFT 26 October 2017

Invasive pressures color settings for channels

Select Monitor Setup > Colors > Invasive Pressures to adjust the channel color settings for
the current patient. The following table lists the factory default settings.
NOTE
Setting
Art 1 (UAC 1 in NICU
software package)
CVP 2 (UVC 2 in NICU
software package)

Other parameters color settings

Select Monitor Setup > Colors > Other Parameters to adjust the color settings for the
current patient. The following table lists the factory default settings.
Setting
ECG
SpO2
NIBP
Resp
Temp
CO2

Monitor sound settings

Select Monitor Setup > Sound Volumes to adjust the volume settings for the current patient.
The following table lists the factory default settings.
Setting
Alarm Volume
This setting appears
when the Alarm
Volume Control setting
is set to Common for
All.
Alarm Volume
for: High & Medium
Priority
This setting appears
when the Alarm
Volume Control setting
is set to Separate for
Low.
2094480-001
Only the factory default site labels for invasive pressure channels
1 and 2 are shown in the table.
ED ICU
Cyan
ED
ICU
ED ICU
7
7
CARESCAPE ONE
NICU OR
Red
Cyan
White
NICU OR
Green
Yellow
Red
White
White
White
NICU OR
6
6
Default settings
PACU
PACU
PACU
7
7
347