Temperature Default Settings - GE CARESCAPE ONE User Manual

CARESCAPE ONE User Manual DRAFT 26 October 2017
Setting Description
Respiration Rate
Select the
alarm limits high/low alarm
limits.
Apnea limit Select the time
seconds delay before an
apnea alarm is
generated.

Temperature default settings

T1, T2 default settings
Select Monitor Setup > Main Setup > Parameter Setup > Page 2 > Temperatures > Setup
to adjust these settings for the current patient. The following table lists the factory default
settings.
Setting Description
T1 Measurement
Select the
temperature site
to display.
T1 Label Select the
temperature site
label.
T2 Measurement
Select the
temperature site
to display.
T2 Label Select the
temperature site
label.
Select Monitor Setup > Main Setup > Parameter Setup > Page 2 > Temperatures > T1, T2
Alarms to adjust these settings for the current patient. The following table lists the factory
default settings.
Setting Description
T1 alarm limits Select the
high/low alarm
limits.
T2 alarm limits Select the
high/low alarm
limits.
T2 - T1 alarm limit Select the high
alarm limit.
Enable alarm
T1 alarms on/off
when limits are
violated.
2094480-001
ED
ICU
60/OFF 60/OFF
(Infant
profile:
60/15.)
ED ICU
ED ICU
38.5/34
(Pediatric and Infant
profiles: 38/35.5)
38.5/34
(Pediatric and Infant
profiles: 38/35.5)
Disabled
CARESCAPE ONE
Default settings
NICU OR
75/20 60/OFF
(Perfusion
profile:
OFF/OFF.)
20 s
NICU OR
Enabled
T1
Enabled
T2
NICU OR
37.5/36 38.5/34
(Pediatric and Infant
profiles: 38/35.5)
37.5/36 38.5/34
(Pediatric and Infant
profiles: 38/35.5)
4
Enabled
(Perfusion
profile:
Disabled)
PACU
60/OFF
PACU
PACU
Disabled
365