Monitor Parameter Settings; Admit/Discharge Or Start/End Case Settings - GE CARESCAPE ONE User Manual

CARESCAPE ONE User Manual DRAFT 26 October 2017
Default settings
Setting
Alarm Volume for: Low
Priority
This setting appears
when the Alarm
Volume Control setting
is set to Separate for
Low.
Beat Volume
Touch Volume
Completed NIBP
Volume

Monitor parameter settings

Select Monitor Setup > Main Setup > Parameter Setup to adjust the parameter
settings for the current patient.
For more information, refer to the user information provided.

Admit/discharge or start/end case settings

Select Pt. Data & Trends > Admit/Discharge or Start / Reset Case > Patient to adjust the
admit/discharge or start/end case settings for the current patient/case. Some settings
remain blank (empty) until a value is selected for the current patient. The following table
lists the factory default settings.
Setting Description
MRN:
Select to enter
the patient's
Second ID
medical record
number and
second ID.
Name:
Select to enter
the patient's
name.
Profile Select the
monitor profile.
Select Pt. Data & Trends > Admit/Discharge or Start / Reset Case > Patient, then select
the Date of Birth: Age: field to open the Edit Demographics window Page 1 tab, or select
the Height: Weight: BSA: Gender: Ethnicity: field to open the Edit Demographics window
Page 2 tab. Some settings remain blank (empty) until a value is selected for the current
patient. The following table lists the factory default settings for the settings in the Edit
Demographics window.
348
ED
ICU
7
0
ED ICU
Medical
CARESCAPE ONE
NICU OR
6
5
2
3
NICU OR
Blank
Blank
Premature
General
PACU
7
0
PACU
2094480-001