2
14.
Block Diagram of Clock Monitor Function
The clock monitor function consists of the following two blocks:
• Clock output selector
• Clock output control register (CLKE)
n Block Diagram of Clock Monitor Function
—
l
Clock output selector
Selects the signal to output from the P30/ADST/CLKO pin. This pin functions as a clock output if
clock output is enabled in the clock output control register (CLKE: CLKEN = "1").
MB89620 series
—
—
—
—
—
Divide-by-two F
C
(5 MHz)
P30 output latch
F
: Source oscillation
C
The frequency enclosed in parentheses ( ) is for a 10 MHz source oscillation.
Figure 14.2 Block Diagram of Clock Monitor Function
Internal data bus
—
CLKEN
Clock output enable signal
Clock output
selector
CHAPTER 14 CLOCK MONITOR FUNCTION
Pin
P30/ADST/CLKO
14
265