Table 1.3 Package And Corresponding Products - Fujitsu F2MC-8L MB89620 Series Hardware Manual

3
1. Differences among Products
This section describes the differences between the 16 products in the MB89620 series
and lists points to note in product selection.
n Differences among Products and Points to Note for Product Selection

Table 1.3 Package and Corresponding Products

Part number
Package
DIP-64P-M01
DIP-64C-A06
FPT-64P-M03
FPT-64P-M06
FPT-64P-M09
MDP-64C-P02
MQP-64C-P01
: Available
*: Lead pitch converter sockets (manufacturer: Sun Hayato Co., Ltd.) are available.
64SD-64QF-8L: For conversion from DIP-64P-M01 or DIP-64C-A06 to FPT-64P-M03
64SD-64SQF2-8L: For conversion from DIP-64P-M01 or DIP-64C-A06 to FPT-64P-M09
Inquiry: Sun Hayato Co., Ltd.: TEL 81-3-3802-5760
Memory size
l
Before evaluating using the piggyback product, verify its differences from the product that will
actually be used. Take particular care on the following points. (See section 3.1, "Memory
Space."):
• On the MB89623, MB89T623, or MB89V623, when using internal RAM only, each general-
purpose register area is limited to 0100
• On the MB89P627 and MB89W627, the program area starts from address 8006
MB89PV620 and MB89627 starts from 8000
addresses 8000
reading these addresses. On the MB89PV620 and MB89627, addresses 8000
could also be used as a program ROM. However, do not use these addresses in order to
maintain compatibility of the MB89P627 and MB89W627.)
• On the MB89P629, the program area starts from 8007
MB89628R, and MB89629R starts from 8000
8006
addresses. On the MB89PV620, MB89628R, and MB89629R, addresses 8000
could also be used as a program ROM. However, do not use these addresses in order to
maintain compatibility of the MB89PV620, MB89628R, and MB89629R.)
• The stack area, etc., is set at the upper limit of the RAM.
• The external area is used.
6
CHAPTER 1 OVERVIEW
MB89623
MB89626
MB89625
MB89627
MB89T623
MB89P625
MB89T625
×
×
×
×
: Not available
to 8005 comprise the option setting area, option settings can be read by
H H
comprise the option setting area, option settings can be read by reading these
H
MB89P627
MB89P629 MB89W625
MB89628R MB89W627
MB89629R
× ×
× ∗ × ∗ ×
× ∗ ×
× ×
× ×
to 017F (16 banks).
H H
. (On the MB89P627 and MB89W627,
H
. (On the MB89P629, addresses 8000
H
MB89V623
MB89PV620
MB89V625
×
×
∗ × ∗ ×
× ×
∗ × ∗ ×
× ×
× ×
, but on the MB89PV620,
H
×
×
∗
×
∗
but on the
H
to 8005
H H
to
H
to 8006
H H
MB89620 series