Fujitsu F2MC-8L MB89620 Series Hardware Manual page 294

Table Bb Instruction List Columns
Column
Mnemonic
~
#
Operation
TL, TH, AH
N, Z, V, C
OP Code
MB89620 series
Assembler notation of an instruction
Number of instructions
Number of bytes
Operation of an instruction
A content change when each of the TL, TH, and AH instructions is executed. Symbols in the column
indicate the following:
• "–" indicates no change.
• dH is the 8 upper bits of operation description data.
• AL and AH must become the contents of AL and AH immediately before the instruction is
executed.
• 00 becomes 00.
An instruction of which the corresponding flag will change. If + is written in this column, the relevant
instruction will change its corresponding flag.
Code of an instruction. If an instruction is more than one code, it is written according to the following
rule:
Example: 48 to 4F ← This indicates 48, 49, ... 4F.
Description
APPEND
273
APPENDIX