Fault And Status Reporting Between The Module And Controllers; Module Tag Names And Definitions - Rockwell Automation Allen-Bradley ArmorBlock 1732E-IB8M8SOER User Manual

Fault and Status Reporting
Between the Module
and Controllers
Module Tag Names and
Definitions
Module Tags
The ArmorBlock EtherNet/IP Dual Port 8-point Sequence of Events Input and
Scheduled Output Modules send fault/status data to the owner-controller. The
module maintains a Module Fault Word, the highest level of fault reporting.
The following table describes the tag that can be examined in ladder logic to
indicate when a fault has occurred for your module
:
Tag
Module Fault Word
• If a communication fault occurs on the module, all 32 bits in the Module
Fault Word are set to 1.
Bit 31
Module Fault Word
The 1732E-IB8M8SOER and 1732E-OB8M8SR has three sets of tags:
• Configuration
• Input
• Output
Rockwell Automation Publication 1732E-UM003D-EN-E - November 2021
Description
This word provides fault summary reporting. The tag name is Fault.
A communications fault sets all bits in the Module Fault Word.
A
Appendix
Bit 0
83