Connection Examples; Figure 18: Connection Example With Sense; Figure 19: Connection Example Without Sense - WAGO 750-563/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR
750-563/040-000 2AO 0/4-20mA/ 6-18V DC/ 16Bit /XTR
6.2

Connection Examples

Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
For further information about shielding, see system manual WAGO-I/O-SYSTEM
750 XTR, section "Connect Devices" > ... > "Shielding."

Figure 18: Connection Example with Sense

Figure 19: Connection Example without Sense

Connect Devices 55
Manual
Version 1.3.0