Emc Declaration; Calibration; General Information - Dräger Babytherm 8004 Instructions For Use Manual

Calibration

NOTE
The scale has been calibrated before delivery. In
certain geographical regions, the precision speci-
fied in the Technical Data will only be attained if
the device is recalibrated at the installation site.
Calibration must be performed by authorised per-
sonnel only.

EMC declaration

General information

The EMC compliance of the product has been
evaluated with the external cables, transducers,
and accessories specified in the list of accessories.
Other accessories which do not affect EMC
compliance may be used if no other reasons forbid
their use (see other sections of these instructions
for use). The use of noncompliant accessories can
result in increased emissions or decreased
immunity of the medical device.
The medical device may only be used adjacent to
or stacked with other devices if this configuration is
approved by Dräger. If adjacent or stacked use of
configurations not approved by Dräger is inevitable,
verify correct functioning of the medical device in
this configuration before it is used. In any case,
strictly observe the instructions for use of the other
devices.
Instructions for use Babytherm 8004/8010
Technical data
113