R&S NRP18S Series User Manual page 65

®
R&S NRP18S-xx
FORMat:SREGister <sregister>
Specifies which format is used for the return value of *STB?.
Parameters:
<sregister>
Example:
FORMat[:DATA] [<data,length>, <length>]
Specifies how the R&S NRP18S-xx sends the numeric data to the controlling host/
computer.
Parameters:
<data,length>
<data[,length]>
8.6.3 Retrieving Results
After performing the measurement, you can query the measurement results with a
command from the FETCh subsystem.
Remote commands:
[SENSe<Sensor>:]FUNCtion
FETCh<Sensor>:ARRay[:POWer][:AVG]?
FETCh<Sensor>[:SCALar][:POWer][:AVG]?
User Manual 1178.3686.02 ─ 05
ASCii | HEXadecimal | OCTal | BINary
*RST: ASCii
FORM:SREG ASC
<REAL,32 | 64>
REAL
Block of binary values, 32-bit or 64-bit each; so-called "SCPI
definite length block"
32 | 64
32-bit or 64-bit
If you omit the length, the R&S NRP18S-xx sets the last used
length.
Example for REAL,32 format:
#6768000....<binary float values>....
Example for REAL,64 format:
#71536000....<binary float values>....
<ASCii[,0 to 12]>
ASCii
List of comma separated, readable values.
[,0 to 12]
Defines the number of decimal places.
The reset value 0 does not restrict the number of decimal pla-
ces.
Example for ASCii,4 format:
1.2938e-06, -4.7269e-11, ...
*RST: ASCii,0
.............................................................................................66
.......................................................................... 67
........................................................................67
Remote Control Commands
Configuring and Retrieving Results
65