Scpi Command Structure - R&S NRP18S Series User Manual

®
R&S NRP18S-xx
USB Resource String
The syntax of the used USB resource string is:
USB::<vendor ID>::<product ID>::<serial number>[::INSTR]
where:
●
<vendor ID> is the vendor ID for Rohde & Schwarz (0x0AAD)
●
<product ID> is the product ID for the Rohde & Schwarz sensor
●
<serial number> is the individual serial number on the rear of the sensor
Table 10-2: R&S NRP18S
R&S NRP18S-xx power sensor
R&S NRP18S-10
R&S NRP18S-20
R&S NRP18S-25
Example:
USB::0x0AAD::0x0148::100001
0x0AAD is the vendor ID for Rohde & Schwarz.
0x0148 is the product ID for the R&S NRP18S-10 power sensor.
100001 is the serial number of the particular power sensor.

10.2 SCPI Command Structure

SCPI commands - messages - are used for remote control. Commands that are not
taken from the SCPI standard follow the SCPI syntax rules. The power sensor sup-
ports the SCPI version 1999. The SCPI standard is based on standard IEEE 488.2 and
aims at the standardization of device-specific commands, error handling and the status
registers.
SCPI commands consist of a so-called header and, usually, one or more parameters.
The header and the parameters are separated by a "white space" (ASCII code 0 to 9,
11 to 32 decimal, e.g. blank). The headers can consist of several mnemonics (key-
words). Queries are formed by appending a question mark directly to the header.
The commands can be either device-specific or device-independent (common com-
mands). Common and device-specific commands differ in their syntax.
10.2.1 Syntax for Common Commands
Common (=device-independent) commands consist of a header preceded by an aster-
isk (*) and possibly one or more parameters.
Examples:
User Manual 1178.3686.02 ─ 05
‑ xx USB product IDs
Remote Control Basics
SCPI Command Structure
USB product ID
0x0148
0x014A
0x014C
129