R&S NRP18S Series User Manual page 23

®
R&S NRP18S-xx
Table 5-2: Operating an R&S NRP18S-xx with a different attenuator
Sensor operation mode...
... with a different S-parameter
device not supplied in the
delivery
Setup
Figure 5-1: Setup with an R&S NRPV
User Manual 1178.3686.02 ─ 05
R&S S-Parameters tool dialogs...
Load the S-Parameter device describing the attenuator into the sensor
using the S-Parameters tool included in the R&S NRP Toolkit, see
ter 8.8.4.5, "Using the S-Parameters
Activate the "S-Parameter Correction" in the R&S NRPV "Channel Set-
tings" dialog.
Operating Concepts
R&S NRPV
Tool", on page 91.
7
Chap-
23