R&S NRP18S Series User Manual page 19

®
R&S NRP18S-xx
–
–
●
For information on other operating systems, see
Downloads",
5.1.3 R&S NRP Toolkit for Windows
The R&S NRP Toolkit installer for Windows-based systems contains the components
described in the release notes available at
kit.
Installing on a computer
1. Start the R&S NRP Toolkit installer on the Windows-based computer.
In the "NRP-Toolkit Setup" dialog, the correct R&S NRP Toolkit version for your
operating system, 32-bit or 64-bit, is already selected.
2. Enable the components you want to install.
●
●
User Manual 1178.3686.02 ─ 05
Microsoft Windows 8/ 8.1 32/64-bit
Microsoft Windows 10 32/64-bit
on page 18.
"NRP-Toolkit (SDK)"
The software development kit (SDK) provides programming examples for the
R&S power sensors.
See Chapter 9, "Performing Measurement Tasks - Programming
on page 120.
"IVI Shared Components"
Installs the USBTMC driver. Enabled by default because the installation is rec-
ommended.
See also Table 10-1.
Operating Concepts
Chapter 5.1.1, "Versions and
www.rohde-schwarz.com/software/nrp-tool-
R&S NRP Toolkit
Examples",
19