R&S NRP18S Series User Manual page 26

®
R&S NRP18S-xx
Table 5-3: Operating an R&S NRP18S-xx with or without attenuator
Sensor operation mode...
... with the attenuator supplied
in the delivery
... without the supplied attenu-
ator
User Manual 1178.3686.02 ─ 05
R&S Power Viewer dialogs...
The application automatically recognizes the activated S-parameter
device in the sensor and activates the "S-Parameter" correction.
If the supplied attenuator is not connected, you must disable S-Parameter
correction in the "S-Parameter" settings dialog.
To disable or enable the S-Parameter correction, select "Sensor > S-
Parameter".
Alternatively, you can change the default setting of the sensor by disa-
bling "S-Parameter Correction" via the S-parameters tool included in the
R&S NRP Toolkit.
Operating Concepts
R&S Power Viewer
26