®
R&S
NRP18S-xx
SYSTem:ERRor:ALL?
Queries all unread entries in the error/event queue and removes them from the queue.
The response is a comma-separated list in first out order, each entry consisting of the
error number and a short description of the error.
Positive error numbers are instrument-dependent. Negative error numbers are
reserved by the SCPI standard.
Example:
Usage:
SYSTem:ERRor:CODE:ALL?
Queries all unread entries in the error/event queue and removes them from the queue.
Only the error numbers are returned.
Example:
Usage:
SYSTem:ERRor:CODE[:NEXT]?
Queries the oldest entry in the error queue and then deletes it. Only the error number
is returned.
Example:
Usage:
SYSTem:ERRor:COUNt?
Queries the number of entries in the error queue.
Example:
Usage:
User Manual 1178.3686.02 ─ 05
SYST:ERR:ALL?
Query
0,"No error"
Response
Query only
SYST:ERR:CODE:ALL?
Query
0
Response: No errors have occurred since the error queue was
last read out.
Query only
SYST:ERR:CODE?
Query
0
Response: No errors have occurred since the error queue was
last read out.
Query only
SYST:ERR:COUN?
Query
1
Response: One error has occurred since the error queue was
last read out.
Query only
Remote Control Commands
Configuring the System
108