R&S NRP18S Series User Manual page 37

®
R&S NRP18S-xx
7. Click "Update".
During the update process, a progress bar is displayed. The update sequence can
take a couple of minutes, depending on the sensor model and the size of the
selected file.
8. Check if the update was successful. The firmware version in the "Identification"
field must match the version you selected in the "Firmware" field.
Troubleshooting
You do not find the sensor in the list of sensors provided by Firmware Update for NRP
Family.
The driver assigned to the sensor is the legacy driver.
► Install a recent VISA software.
The power sensor is highlighted by a yellow exclamation mark in the Windows device
manager.
Windows tries in vain to find a USB driver for the power sensor.
► Install a recent VISA software.
For further information, see
on page 153.
6.2.2 Using Remote Control
If you want to integrate a firmware update function in an application, use
FWUPdate
User Manual 1178.3686.02 ─ 05
Chapter 11.3, "Problems during a Firmware
on page 109.
Firmware Update
Updating the Firmware
Update",
SYSTem:
37