Table of Contents
Advertisement
Error Messages
Warning Messages
User thresholds have been truncated. The logic analysis system is
trying to translate a configuration having thresholds greater than 6 Volts
or less than -6 Volts.
Using Default 16517/18 Skew Values. Please See "Skew Adjust"
Menu. The logic analysis system was unable to locate skew values in ROM
and is using default values. To change the skew value, follow the
instructions in the Skew Adjust chapter.
Waiting for Prestore. This message is displayed for a timing analyzer
waiting for prestore.
Warning: Run HALTED due to variable change. This message
appears when certain analyzer settings are changed during a repetitive
run. When this occurs, the analyzer stops.
Xmin is equal to Xmax. The value assigned to X minimum is equal to
the value assigned to X maximum.
Xmin is greater than Xmax. The value assigned to X minimum is
greater than the value assigned to X maximum.
Ymin is equal to Ymax. The value assigned to Y minimum is equal to
the value assigned to Y maximum.
Ymin is greater than Ymax. The value assigned to Y minimum is
greater than the value assigned to Y maximum.
11–6
Advertisement
Table of Contents
