Delay Field - Agilent Technologies 16517A User Reference

The Waveform Menu

Delay Field

Delay Field
The Delay field allows you to scroll the data and place the desired section at
center screen. Changing the delay will not effect the data acquisition unless
it is a timing analyzer and the acquisition mode is Automatic mode. The
delay range of a timing display is from −2500 seconds to + 2500 seconds.
If you want to move the display window to view data located offscreen to the
right, enter a positive delay. If you want to move the display window to view
data located offscreen to the left, enter a negative delay.
You can enter a delay using the knob by selecting the Delay field once, which
turns it light blue, then turning the knob. If you select the Delay field a
second time when it is light blue, a pop-up keypad appears, which enables
you to enter an exact number.
See Also The "Acquisition Control Field" in the Trigger menu for more information on
the effects of delay in the Automatic mode.
Delay field
Delay Field
6–6