Table of Contents
Advertisement
The Trigger Menu
Assigning Resource Term Names and Values
Setting Bit Pattern Values
Just to the right of the term name fields are the term assignment fields.
When any of the individual assignment fields are selected, a keypad appears.
Use this keypad to assign values or Don't Cares (x).
Edge Terms 1 and 2
If you want to qualify an edge, place the appropriate edge on the data
channel you are watching. When the analyzer sees an edge, the term
becomes true.
Edge terms can be used singularly or in combination with each other across
all assigned channels. When you specify an edge on more than one channel,
the analyzer ORs the edges.
The following edge choices are available for each bit:
•
Positive edge (↑)
•
Negative edge (↓)
•
Either positive or negative ( )
•
Not assigned (.)
After the assignment menu closes, you may see "$" indicators in the
assignment field display. This symbol indicates the assignment can't totally
be displayed in the selected base. It was assigned in another base. When
Binary is selected for the numeric base, you see the actual assignments.
Edge Assignment Pop-up Menu
4–28
Term assignment field
Advertisement
Table of Contents
