Table of Contents
Advertisement
Installation and Service
To Prepare the Mainframe
Starting from the top, pull the cards and filler panels that need to be
4
moved halfway out.
All multi-card modules will be cabled together. Pull these cards out together
C A U T I O N
to prevent damage to the cables and connectors.
Remove the cards and filler panels.
5
Remove the cards or filler panels that are in the slots intended for the module
installation. Push all other cards into the card cage, but not completely in.
This is to get them out of the way for installing the module.
Some modules for the Logic Analysis System require calibration if you move
them to a different slot. For calibration information, refer to the manuals for
the individual modules.
13–4
Advertisement
Table of Contents
