Bit Editing Field - Agilent Technologies 16517A User Reference

The Compare Menu

Bit Editing Field

Bit Editing Field
The bit editing fields are located in the center of the Reference listing
display. A bit editing field exists for every label in the display unless the
label's base is ASCII. Bit editing fields allow you to modify the values of
individual bits in the Reference image or to specify them as don't compare
bits.
You access data in the Reference listing by rolling the data listing using the
knob until the data is located in the bit editing field. To enter a desired
pattern or don't compare (X) for a bit, select the field and use the pop-up
keypad which appears.
Bit editing field
Bit Editing Field
7–15