Table of Contents
Advertisement
Overlay
The Overlay mode inserts all bits of a label in a single waveform to form a
composite waveform label. The onscreen indication for the Overlay mode is
"All" following the label name.
Viewing State Data in Overlay Mode
When all assigned waveforms in a label are overlaid, the value of the data is
displayed to the right of each new transition in the waveform display.
If the sec/Div is set to view a large increment of time, or if the waveform size
is set to Small or Medium, the state data readout will not fit between
transitions. To display the data readouts within the waveform, expand the
sec/Div and use the Large waveform setting. If symbols are assigned to
represent data values, the symbol is displayed.
Overlaid
waveforms
State Data or Symbols In Overlaid Waveform
The Waveform Menu
Channel Mode Field
Data value or Symbol
displayed in waveform
6–15
Advertisement
Table of Contents
