Table of Contents
Advertisement
Installation and Service
Perform the Functional Tests
Perform the Functional Tests
The Functional Tests verify the main subsystems of the 16517A/18A module
are functioning. The pod channels are not connected to any type of test
signal for any of these tests. If a test fails, a message will appear which
indicates which module board failed. Refer to chapter 8 for a description of
the error messages.
Touch Functional Tests. The functional tests menu appears.
1
To run all of the tests, touch the All Tests field. As each of the
2
functional tests is performed and passed, the status field will change
from UNTESTED to PASS.
Touch Done to exit the test menu. Touch Exit to exit the Functional
3
Tests menu.
13–10
Advertisement
Table of Contents
