Table of Contents
Advertisement
Installation and Service
Exit the Self-tests
To run all of the tests, touch the All Tests field. As each of the
3
skew-dependent tests are performed and pass, the status field will
change from UNTESTED to PASS.
Touch Done to exit the test menu. Touch Exit to exit the Skew
4
Adjustments and Tests menu.
Exit the Self-tests
Touch the 4GHz/1GHz Timing field, then touch Test System.
1
Touch Configuration, then touch Test.
2
If the 16517A/18A module is configured in an Agilent Technologies 16500A
mainframe, the operating system disk must be installed in one of the flexible
disk drives.
Touch the box labeled Touch box to Exit Test System. The Agilent
3
Technologies 16500 operating system will now load and the system
configuration menu will appear.
13–12
Advertisement
Table of Contents
