Table of Contents
Advertisement
4.5 Status Indicators for TTC & 12TC
In the left-lower corner of the Main Window the TTC status indicator LEDs
are located (see section 2.5.1). The meanings of the colors of the LEDs are
described in the table below.
Please note: a further LED displays whether a reference measurement has been
performed (yellow) or not (grey). This can be used to set the reference plane for the
spatial x-axis in (D)TDR- or impedance measurements. See section
information.
LED 1, 2, and 3 grey :
LED 1, 2, or 3 red :
LED 1 green :
LED 1 and 2 green :
LED 1, 2, and 3 green :
Timestamp:
T3SP-Series Operator's Manual
TTC/12TC not applicable/activated
no TTC/12TC activated
TTC for channel 1 active
DTTC for channel 1 and 2 active
12TC active
date and time of TTC/12TC measurements
5.1.2
for further
34
931776 RevB
Advertisement
Table of Contents
