Table of Contents
Advertisement
T3SP-Series Operator's Manual
diagram in the cursor value field. If two cursors are set up for a trace the
delta value is displayed as well. The cursor value field can be double-clicked
to open an overview tabular.
Pressing the CTRL key and clicking a cursor again deletes the cursor. Alter-
natively all cursors can be cleared by pressing the CLR button in the toolbar.
The precision of the cursor values can be changed via the menu item View
Set decimal places of cursor.
Please note: at most two cursors can be set for each sample. That means that if two
cursors are already set in impedance measurement mode and the measurement
mode is changed (e.g. to S11 mode), no more cursors can be set. In this case delete
the existing cursors before setting them in S11 mode.
Legend
By default the legend shows the samples row number corresponding to the
spread sheet row. Alternatively the sample name (only the first 8 charac-
ters) can be displayed. Use View
Show sample names in legend to toggle
between the modes.
Trace highlighting
Trace highlighting can be achieved by clicking on the corresponding entry in
the legend (reset by clicking the entry again).
Data Export
The underlying data of the currently displayed samples can be exported to
various formats. Currently supported formats are csv, xlsx, mat (Matlab)
and sp1/sp2 (Touchstone for S-parameter). For exporting data via the Re-
sult Visualization Window use the export button or the menu entry File
Export.
15
931776 RevB
Advertisement
Table of Contents
