Teledyne T3SP Series Operator's Manual page 14

T3SP-Series Operator's Manual
General Remark
Most measurement modes yield more information than can be displayed in
the yellow result field of the Main Window. To display the specific results
more in detail the Result Visualization Window can be used. The different
kinds of visualizations depend on the currently selected measurement mode
and are therefore described in the specific sections.
Zooming
Zooming functions are available via the buttons in the toolbar. Furthermore
the zoom can be changed via the mouse (left button & wheel) a "fit-to-
screen" can be achieved by double right-clicking within the diagram. Press-
ing the button with the lock symbol has the effect that in time domain mea-
surement modes (as TDR, DTDR & TDR-Compare) the zoom is locked to the
current zoom of the Oscilloscope Window.
Measurement Button
A small green arrow button is located in the status bar to start a measure-
ment. Pressing the button has the same effect as pressing the measurement
button in the Main Window or pressing F5.
Live Traces
Working in Quick Operation Mode (see section 2.6.3) enables the user to
view a "live" trace in the Result Visualization Window. This feature can be
activated via the menu entry Extras Live.
Setting Cursors
The software features (delta) cursors for each displayed sample in the Re-
sult Visualization Window. Cursors can be set by pressing down the CTRL
key while left-clicking a trace. The cursor values are displayed on top of the
14
931776 RevB