with the unit, otherwise the full performance cannot be guaranteed.
•
Prepare your samples in the sample list according to point
quick start chapter.
•
The results of the impedance measurements are displayed in the Re-
sult Visualization Window (see Fig. 5). The impedance is displayed vs.
traveling-time, complying with the time axis in the Oscilloscope Win-
dow. The tolerance mask can be defined in the Impedance Measure-
ment Properties Window (for more details read section 5.1.3).
Fig. 5: Result visualization of impedance measurements
•
In (D)TDR mode some important values (averaged & min./max. im-
pedance in the impedance mask region) are shown in the right upper
corner of the Result Visualization Window .
T3SP-Series Operator's Manual
6.
of the
36
931776 RevB